This is just an update to the ordeal I am having with WBCollect.com.
The background is detailed in this post here.
I logged a dispute with Paypal on Monday on my first order (ordered on September 17, 2013). Haven't heard any reply from them yet.
I was thinking today, since emails are private between the buyer and the seller, it is easy for the seller to ignore them and not be effected since no potential or current buyers would know about it. So what better way to get their attention than to post on their social media site, right?
I logged onto Facebook and search WBCollect, and there they were! Saw the most recent post of another buyer saying how good WBCollect is and how fast they ship. So I posted a reply to that with, "Not so here, 3 weeks no shipping, no reply to emails, now going through Paypal to get my refund."
Then after dinner, literally within 15 minutes of my post, guess what?
I FINALLY get an email reply from WBCollect.
Here's their email:
I'm assuming your Jackson Chung ?
This order shipped I was waiting on completing the refund hoping the item
would show up I will process it tonight when i get near a computer wasn't
able to from my phone I will also verify your other orders have shipped any
questions email me directly at wbbuystoys@gmail.com
Your order has been updated to the following status:
New status: Pending
Please reply to this email if you have any questions
I went back to check their Facebook page and of course my reply was deleted, as expected.
If I do end up getting the item AND the refund, I will gladly send the money back.
It's one or the other, I want the toy if possible, but if not, then I would like my money back please.
Again for background on this post, go here:
http://toys-n-more.blogspot.ca/2013/10/wbcollectcom-ordeal.html
Showing posts with label review. Show all posts
Showing posts with label review. Show all posts
Wednesday, October 23, 2013
Monday, October 21, 2013
WBCollect.com Ordeal
Have anyone else order from WBCollect.com? I discovered this site from my local forum quite a while ago, maybe around early last year. When I found out about them, I was collecting Marvel Universe and they had a lot of loose figures for very good prices. The best part is they ship anything loose for free (even to Canada!), so that was very attractive. I've ordered some small items from them several times and it has all gone well. Although it does take about a week for the order to process and then be shipped out. I received my items for the first few orders I made with them.
Then I believe it was early this year when I ordered a Transformers Shockwave from them. At that time, those figures were still elusive up here in Canada and ordering from WBCollect came out to be about the same price as buying it locally so I ordered one. I waited for 3-4 weeks and my order status was still in processing. I emailed them and never got a reply. In the end, I had to go through Paypal to resolve it.
There was a period that I avoided ordering from them after that experience. Then I guess about a month ago, when those 6" Star Wars Black Series came out and I saw them on WBCollect, I decided to have a go with them again. I received the figure promptly after the initial one week of processing. So I figured that time with the Shockwave might just be a fluke.
So about a month ago, I made three orders with them, total came to just under $100. And again, it has been 3 weeks of processing. I was thinking to myself...oh no not again with this crap! I emailed them 2 times with no reply. And finally again, I am resorted to going through Paypal to get my money back. I just sent the dispute for the first order which I made on September 17, 2013. So it has been well over 3 weeks....and tada still processing!
This is just a post to warn those who are considering ordering from them. Their prices are tempting and they have some cool stuff that are probably hard to find elsewhere. But beware...after this second time...I am just going to stay clear from this store for good!
P.S. I will update this when I get a reply from them...or get my money back...
Then I believe it was early this year when I ordered a Transformers Shockwave from them. At that time, those figures were still elusive up here in Canada and ordering from WBCollect came out to be about the same price as buying it locally so I ordered one. I waited for 3-4 weeks and my order status was still in processing. I emailed them and never got a reply. In the end, I had to go through Paypal to resolve it.
There was a period that I avoided ordering from them after that experience. Then I guess about a month ago, when those 6" Star Wars Black Series came out and I saw them on WBCollect, I decided to have a go with them again. I received the figure promptly after the initial one week of processing. So I figured that time with the Shockwave might just be a fluke.
So about a month ago, I made three orders with them, total came to just under $100. And again, it has been 3 weeks of processing. I was thinking to myself...oh no not again with this crap! I emailed them 2 times with no reply. And finally again, I am resorted to going through Paypal to get my money back. I just sent the dispute for the first order which I made on September 17, 2013. So it has been well over 3 weeks....and tada still processing!
This is just a post to warn those who are considering ordering from them. Their prices are tempting and they have some cool stuff that are probably hard to find elsewhere. But beware...after this second time...I am just going to stay clear from this store for good!
P.S. I will update this when I get a reply from them...or get my money back...
Monday, June 13, 2011
Review: Candy Toy Kamen Rider Birth and CLAWs Set
The debut of Gotou-san as Birth in episode 38 of Kamen Rider OOO just reminded me of this toy so
here's another quick review of this candy toy I got a while ago. It's for Kamen Rider Birth and his CLAWs weapons kit from Kamen Rider OOO. But first, let's check out Gotou-san as Birth shall we?
Birth and CLAWs are two separate items. I got the whole box so I was able to get this set easily. I think it is much harder to get these two if you were to buy singles from retail stores. I remember seeing only the ones that are not so popular left on the shelf when I was in Hong Kong last year.

The Birth figure comes fully assembled in the box, you only need to apply the stickers. The figure is about the same size as the 3 3/4" Joes. The Birth Buster gun also comes with the figure.

CLAWs came with each piece bagged individually and required some basic assembly. Each box comes with a piece of candy as well, but I've already eaten it before I got to the toy LOL!


And of course, the CLAWs components can be disassembled and used on Birth just like in the show.
Drill Arm

Shovel Arm

Crane Arm

Breast Cannon

Catepillar Leg

Cutter Wing

Happy BIRTHday! (The day where all 6 components were combined with Birth)

Overall I have to say I am really surprised with the quality of this candy toy. It is really well made and the details are very nice for this price. The details seems pretty close to the larger OCC line from what I saw in reviews. It has very good playability with all the combos you can make with the CLAWs set. I have several other figures from this set that I have yet to review, but I will wait for my set 3 coming this month and review them all at once.
here's another quick review of this candy toy I got a while ago. It's for Kamen Rider Birth and his CLAWs weapons kit from Kamen Rider OOO. But first, let's check out Gotou-san as Birth shall we?
Birth and CLAWs are two separate items. I got the whole box so I was able to get this set easily. I think it is much harder to get these two if you were to buy singles from retail stores. I remember seeing only the ones that are not so popular left on the shelf when I was in Hong Kong last year.
The Birth figure comes fully assembled in the box, you only need to apply the stickers. The figure is about the same size as the 3 3/4" Joes. The Birth Buster gun also comes with the figure.
CLAWs came with each piece bagged individually and required some basic assembly. Each box comes with a piece of candy as well, but I've already eaten it before I got to the toy LOL!
And of course, the CLAWs components can be disassembled and used on Birth just like in the show.
Drill Arm
Shovel Arm
Crane Arm
Breast Cannon
Catepillar Leg
Cutter Wing
Happy BIRTHday! (The day where all 6 components were combined with Birth)
Overall I have to say I am really surprised with the quality of this candy toy. It is really well made and the details are very nice for this price. The details seems pretty close to the larger OCC line from what I saw in reviews. It has very good playability with all the combos you can make with the CLAWs set. I have several other figures from this set that I have yet to review, but I will wait for my set 3 coming this month and review them all at once.
Sunday, June 12, 2011
Review: Revoltech Danboard
Here's a short and sweet review of the ever so popular Revoltech Danboard. A quick Google Image search with the word "Danboard" or "Danbo" will yield pages and pages of photographs of this character. There is even a flickr group for Danbo - Danbo Love - that has over 14,000 entries!!! So why is this little guy so popular?
From what I understand, Danboard is from the Japanese manga "Yotsuba&!". He is basically a cardboard robot.
Even the packaging of this toy is some type of thin cardboard paper. The box design is simple and clean.

The top of the packaging is made to look like Danboard as well.

There's not a lot of accessories included in this figure. The extra head is Miura Hayasaka who is the little kid who dressed up as Danboard in the manga. The only other item is the display stand. The Revoltech joint is for the extra head.

Danboard is a very simple figure and that is why I think it is so popular. The figure expression-less, so it can be used in all types of photographs. The expression relies only on the setting on the photograph. For examples, check out the 365 days of Danboard project by Arielle Nadel.

Articulation-wise, it is very basic: Revoltech joints for the neck, shoulders, and legs. Five joints in total.

The "side skirts" are one piece with the torso, but the front and rear part of the skirt is hinged, allowing the legs to articulate back and forth slightly.

Another feature of this figure is...

Light-up eyes! I think this feature will be very useful in some dark and scary photographs...
Like Zombie Danbo!

But of course, we all know Danbo is just a costume for cute little Miura Hayasaka...

Or is it?

So in conclusion, I am just glad I was able to get my hands on one of these gems in the end (okay, more than one). I've been wanting one of these figures ever since I saw some amazing photographs with this figure as the subject. I don't really know what rating I can give it because there's not much to it really. There's basically only one color to it and there's only 5 joints in total on the whole figure. It's just one of those unique figures that makes toy photography so fun!
From what I understand, Danboard is from the Japanese manga "Yotsuba&!". He is basically a cardboard robot.
Even the packaging of this toy is some type of thin cardboard paper. The box design is simple and clean.
The top of the packaging is made to look like Danboard as well.
There's not a lot of accessories included in this figure. The extra head is Miura Hayasaka who is the little kid who dressed up as Danboard in the manga. The only other item is the display stand. The Revoltech joint is for the extra head.
Danboard is a very simple figure and that is why I think it is so popular. The figure expression-less, so it can be used in all types of photographs. The expression relies only on the setting on the photograph. For examples, check out the 365 days of Danboard project by Arielle Nadel.
Articulation-wise, it is very basic: Revoltech joints for the neck, shoulders, and legs. Five joints in total.
The "side skirts" are one piece with the torso, but the front and rear part of the skirt is hinged, allowing the legs to articulate back and forth slightly.
Another feature of this figure is...
Light-up eyes! I think this feature will be very useful in some dark and scary photographs...
Like Zombie Danbo!
But of course, we all know Danbo is just a costume for cute little Miura Hayasaka...
Or is it?
So in conclusion, I am just glad I was able to get my hands on one of these gems in the end (okay, more than one). I've been wanting one of these figures ever since I saw some amazing photographs with this figure as the subject. I don't really know what rating I can give it because there's not much to it really. There's basically only one color to it and there's only 5 joints in total on the whole figure. It's just one of those unique figures that makes toy photography so fun!
Review: Dr. Slump Arale-chan Arale Norimaki
This is a review for the Arale Norimaki figure by CM's Corporation I recently got from Amiami. First let's take a brief look at who this character is from her Wiki page.
Arale Norimaki (則巻アラレ, Norimaki Arare) is an android built by Senbei Norimaki, known for her naïvety, energetic personality, lack of common sense and unbelievable superhuman strength but ironically she is nearsighted and needs to wear glasses. Senbei's mission is to convince the other citizens of Penguin Village that she is no more than a typical girl, which they appear to believe in spite of them taking notice to numerous displays of her superhuman capabilities.

I vaguely remember watching this show as IQ博士 when I was a young kid. I don't remember much from the show except for the incredibly hilarious main character known as Arale and her friend Gatchan (the flying-metal-eating fairy). She also lives in a village with animal neighbours lol. I actually recently picked up a Dr. Slump movie from the local chinese mall and it was quite hilarious and entertaining, it was certainly nostalgic. The best part was the opening song, I mean who wouldn't just love this tune?!
Anyways, let's get on with the toy!
Initial impressions with the packaging leaves me thinking this is a cheaply made toy. I don't know if it's the pink and white stripes or what, but it almost screams knock-off to me LOL
As you can see, this figure of Arale-chan is of her in her pilot helmet outfit, not the regular classic one with winged-cap.

Upon opening the package, I was introduce to the smell of...stinky plastic. I don't know what type of plastic has this smell, but I don't like it. Turns out it is just the flame attack part that was smelly. It's one of those soft-rubbery type plastic.
The accessories include 3 faces, 3 pair of hands, her NCHA flame cannon attack and the saying in Japanese, a stick, a pink caca, and some clear stands for the figure and accessories.

First look at the figure shows it has some decent paint apps. She is very top heavy because of her head so she does not stand very well by herself. One little detail that I was somewhat disappointed with was that her glasses sits lower on her face than what was on the box art.
She looks soooo cute!

There was a little bit of rough paint area on the back of her helmet, no biggie though.

Articulation-wise, her knees and elbows are single jointed, shoulders and hips are ball-jointed although their movement are severally hindered by the little straps on the side of her helmet and her shorts. Wrists are ball-jointed, but the balls are not very round so it's quite hard to rotate her hands without ripping out her whole arm. The head is mounted to the torso with a ball joint and to the face with a rachet type joint (more on that below).

When I tried to rotate her hands, the whole shoulder joint detached from the torso. I couldn't get it to go back in properly because of the way the joint goes into the torso. I've never seen it done this way, it is sort of an awkward design. It was very hard to apply force on the joint to get it into place because the hole is inside the shoulder.

To change her face, you first have to remove the earmuff pieces, then the back half of her helmet. The face piece slides into the front part of the helmet. Here you can see how the head is connected to the "neck" shown above. The outer ball piece that attaches to the neck piece needs to be moved remove and attached to the exchanged face as well. This piece feels really flimsy and I was scared to handle it a lot when changing her expressions.

Here are all the pieces required to change her expressions.

Another example of why I keep thinking this figure is poorly made. They couldn't even get the holes drilled correctly for the earmuffs!

Even with all the drawbacks in quality of this figure, it is still a good representation of Arale-chan. Did you know her favourite hobby is poking poo? LOL
This is with one of the extra hands she comes with which was basically same as the stock fists but with a tiny hole drilled in the center to hold the stick.

One of Arale-chan's special abilities is her NCHA mouth cannon attack (see video below).
And recreated here with the figure and supplied accessories.

Overall, I give this figure a 7/10. It is a good representation of the Arale-chan character in the Dr. Slump cartoon. Quality-wise, it is just not up-to-par with figures from lines such as Revoltech and Figma. The joints are a pain to configure with, specifically the shoulder and the wrists. Although it does come with quite some accessories to recreate some funny moments in the show. Do I recommend it? Yes if you are a fan of the show and wants a figure of Arale-chan since I think this one if the only action figure available for the character. No if you are not familiar with the character as you might be slightly disappointed by the quality. I admit I am a bit stumped by the quality of this figure, but I am just as happy to finally have an action figure of this lovable character.
Arale Norimaki (則巻アラレ, Norimaki Arare) is an android built by Senbei Norimaki, known for her naïvety, energetic personality, lack of common sense and unbelievable superhuman strength but ironically she is nearsighted and needs to wear glasses. Senbei's mission is to convince the other citizens of Penguin Village that she is no more than a typical girl, which they appear to believe in spite of them taking notice to numerous displays of her superhuman capabilities.
I vaguely remember watching this show as IQ博士 when I was a young kid. I don't remember much from the show except for the incredibly hilarious main character known as Arale and her friend Gatchan (the flying-metal-eating fairy). She also lives in a village with animal neighbours lol. I actually recently picked up a Dr. Slump movie from the local chinese mall and it was quite hilarious and entertaining, it was certainly nostalgic. The best part was the opening song, I mean who wouldn't just love this tune?!
Anyways, let's get on with the toy!
Initial impressions with the packaging leaves me thinking this is a cheaply made toy. I don't know if it's the pink and white stripes or what, but it almost screams knock-off to me LOL
As you can see, this figure of Arale-chan is of her in her pilot helmet outfit, not the regular classic one with winged-cap.
Upon opening the package, I was introduce to the smell of...stinky plastic. I don't know what type of plastic has this smell, but I don't like it. Turns out it is just the flame attack part that was smelly. It's one of those soft-rubbery type plastic.
The accessories include 3 faces, 3 pair of hands, her NCHA flame cannon attack and the saying in Japanese, a stick, a pink caca, and some clear stands for the figure and accessories.
First look at the figure shows it has some decent paint apps. She is very top heavy because of her head so she does not stand very well by herself. One little detail that I was somewhat disappointed with was that her glasses sits lower on her face than what was on the box art.
She looks soooo cute!
There was a little bit of rough paint area on the back of her helmet, no biggie though.
Articulation-wise, her knees and elbows are single jointed, shoulders and hips are ball-jointed although their movement are severally hindered by the little straps on the side of her helmet and her shorts. Wrists are ball-jointed, but the balls are not very round so it's quite hard to rotate her hands without ripping out her whole arm. The head is mounted to the torso with a ball joint and to the face with a rachet type joint (more on that below).
When I tried to rotate her hands, the whole shoulder joint detached from the torso. I couldn't get it to go back in properly because of the way the joint goes into the torso. I've never seen it done this way, it is sort of an awkward design. It was very hard to apply force on the joint to get it into place because the hole is inside the shoulder.
To change her face, you first have to remove the earmuff pieces, then the back half of her helmet. The face piece slides into the front part of the helmet. Here you can see how the head is connected to the "neck" shown above. The outer ball piece that attaches to the neck piece needs to be moved remove and attached to the exchanged face as well. This piece feels really flimsy and I was scared to handle it a lot when changing her expressions.
Here are all the pieces required to change her expressions.
Another example of why I keep thinking this figure is poorly made. They couldn't even get the holes drilled correctly for the earmuffs!
Even with all the drawbacks in quality of this figure, it is still a good representation of Arale-chan. Did you know her favourite hobby is poking poo? LOL
This is with one of the extra hands she comes with which was basically same as the stock fists but with a tiny hole drilled in the center to hold the stick.
One of Arale-chan's special abilities is her NCHA mouth cannon attack (see video below).
And recreated here with the figure and supplied accessories.
Overall, I give this figure a 7/10. It is a good representation of the Arale-chan character in the Dr. Slump cartoon. Quality-wise, it is just not up-to-par with figures from lines such as Revoltech and Figma. The joints are a pain to configure with, specifically the shoulder and the wrists. Although it does come with quite some accessories to recreate some funny moments in the show. Do I recommend it? Yes if you are a fan of the show and wants a figure of Arale-chan since I think this one if the only action figure available for the character. No if you are not familiar with the character as you might be slightly disappointed by the quality. I admit I am a bit stumped by the quality of this figure, but I am just as happy to finally have an action figure of this lovable character.
Wednesday, May 6, 2009
Revenge of the Fallen: Soundwave
The ROTF Soundwave and Bumblebee have been released here at several Walmarts at the start of this week. Apparently they aren't suppose to be on sale until the 30th, but some stores already have them put out. The one I went to only had a BB on the pegs, I found out the rest of them hidden on the top shelf (the advantage of being tall haha).
I've seen pics of the pre-released Soundwave and was pretty sure I was going to pass on it because I thought it was going to be an ultra size. I prefer deluxe size figures because of my limited room and limited budget. I usually wait until there's a sale before buying TF's, all my TF Animated and Universe are purchased when they were on sale. This Soundwave is the first one that I got at full price ($18cdn) because I just had to have it when I saw it. I passed on BB because the one I want is the Alternator style one. Anyways here's a short review on the TF.
ROTF Soundwave Review
First thing I noticed was the in package mode. Most of the time, deluxe size TF's are usually in their vehicle mode when in package, so you couldn't really see how they would look in robot mode. This is what turns me away from some TF's because I only display them in robot mode. Being able to see the robot mode right inside the package is probably what caused me to buy this right away. Not much to say about the package, background design looks pretty interesting with the hieroglyphics. The picture of Soundwave's head in the front of the package reminds me of a evil-lized first movie Optimus Prime head LOL
And here's the description of Soundwave on the back of the instructions,
"Stationed in orbit above Earth, Soundwave swiftly taps into every satellite in range. Within minutes, communications, data traffic, weather information, and high-resolution spy photography flood his sensor net. The spill of data fills him with pleasure, and one by one, the humans' systems come under his complete control. From his seat on high, he is in a position to control the destiny of mankind without their knowledge...or to run their civilization into the ground."
Out of package:
In robot mode, his proportions look a bit weird, short and wide. But I haven't seen the movie so I don't know how he really looks like. I will comment further when I have seen the movie. In robot mode, articulation is pretty good, I still have to play around with it to see. The best part of this TF is the transformation. I thought it was complicated yet neatly engineered. All the pieces go together perfectly and it looks awesome in its satellite mode and vehicle mode.
Paint apps are pretty good, a little messy around the top of the head, but not very noticeable. I looked through several figures to compare the paint apps and they were quite consistent. However, he is begging for a metallic paint job, maybe that will be my next project.
Onto the pics!
(Click pics to enlarge)
Packaging


Robot mode


Satellite mode



Vehicle mode

Overall, I really like this TF. It is really fun to transform. I can't stress enough how well engineered the transformation is. Everything is well thought out and the fitting is perfect! After getting this TF, I can't wait to see how he looks like in the movie!!!
This TF scores a 5 out of 5 from me!
I've seen pics of the pre-released Soundwave and was pretty sure I was going to pass on it because I thought it was going to be an ultra size. I prefer deluxe size figures because of my limited room and limited budget. I usually wait until there's a sale before buying TF's, all my TF Animated and Universe are purchased when they were on sale. This Soundwave is the first one that I got at full price ($18cdn) because I just had to have it when I saw it. I passed on BB because the one I want is the Alternator style one. Anyways here's a short review on the TF.
ROTF Soundwave Review
First thing I noticed was the in package mode. Most of the time, deluxe size TF's are usually in their vehicle mode when in package, so you couldn't really see how they would look in robot mode. This is what turns me away from some TF's because I only display them in robot mode. Being able to see the robot mode right inside the package is probably what caused me to buy this right away. Not much to say about the package, background design looks pretty interesting with the hieroglyphics. The picture of Soundwave's head in the front of the package reminds me of a evil-lized first movie Optimus Prime head LOL
And here's the description of Soundwave on the back of the instructions,
"Stationed in orbit above Earth, Soundwave swiftly taps into every satellite in range. Within minutes, communications, data traffic, weather information, and high-resolution spy photography flood his sensor net. The spill of data fills him with pleasure, and one by one, the humans' systems come under his complete control. From his seat on high, he is in a position to control the destiny of mankind without their knowledge...or to run their civilization into the ground."
Out of package:
In robot mode, his proportions look a bit weird, short and wide. But I haven't seen the movie so I don't know how he really looks like. I will comment further when I have seen the movie. In robot mode, articulation is pretty good, I still have to play around with it to see. The best part of this TF is the transformation. I thought it was complicated yet neatly engineered. All the pieces go together perfectly and it looks awesome in its satellite mode and vehicle mode.
Paint apps are pretty good, a little messy around the top of the head, but not very noticeable. I looked through several figures to compare the paint apps and they were quite consistent. However, he is begging for a metallic paint job, maybe that will be my next project.
Onto the pics!
(Click pics to enlarge)
Packaging
Robot mode
Satellite mode
Vehicle mode
Overall, I really like this TF. It is really fun to transform. I can't stress enough how well engineered the transformation is. Everything is well thought out and the fitting is perfect! After getting this TF, I can't wait to see how he looks like in the movie!!!
This TF scores a 5 out of 5 from me!
Tuesday, May 5, 2009
Marvel Legends Icons Series: Doctor Doom
Felt like opening a new figure the other day, I ended up choosing Dr. Doom from the ML Icons Series. He is my first Icons figure so I was curious how the quality is. The details are pretty good, the paint is alright as well, he has a nice hefty feel. However, the articulation is quite limited. My gripe is the lack of twist joint between the shoulder joints and elbow joints. But for the price I paid for him, it is a great figure for the price.
Here's a few snaps of the figure.
(Click pics to enlarge)





More pics next week while I tinker with my setup.
Here's a few snaps of the figure.
(Click pics to enlarge)
More pics next week while I tinker with my setup.
Subscribe to:
Posts (Atom)